Finnish DIY Sauna

 

Helo offers two high specification Finnish DIY Saunas with quality rock sauna heaters. The saunas provide plugin convenience, excellent insulation and fantastic heat retention. Extremely easy installation for the genuine Finnish sauna experience. Learn more about our Finnish DIY Saunas here or view the Rock 2 DIY Sauna and Rock 4 DIY Sauna in our shop
      

DIY Sauna Installation Instructions

   
Place the floor panel in the desired location on a level surface (Note: The floor panel must be level before installing wall and ceiling panels. If the surface is not level you may need to shim the floor panel to get level.)

STEP 1

Place the floor panel in the desired location on a level surface (Note: The floor panel must be level before installing wall and ceiling panels. If the surface is not level you may need to shim the floor panel to get level.)

Floor Panel

STEP 2

Place back panel in the slot of floor panel

Back Panel

STEP 3

Place the right side panel in the slot of floor panel.

 Right-Hand Panel

STEP 4

Place the left side panel in the slot of floor panel.

 Left-Hand Panel

STEP 5

Secure the Bench Supports according to the pre-marked locations (2 on each side wall) and then place the Bench surface panels into the sauna room.

 Bench Supports

STEP 6

Place the front panel in the slot of floor panel.

 Front Panel

STEP 7

Place the ceiling panel on the four wall panels.

  • Make sure the top panel’s arched side is facing to the front.
  • Make sure trim of the top panel fits completely around the four side panels.
  • Make sure the connection wires from the front panel protrude through the hole of the ceiling panel.
 Ceiling Panel

STEP 8

Install radio in front wall panel and connect (2) wires to the back of the radio.

 Radio

STEP 9

Install radio cover with screws.

 Radio Cover

STEP 10

Connect the wires in ceiling panel under access panel.

  • Note: 3 different style connections are used to ensure proper connections.
 Radio Wires

STEP 11

Secure the sauna heater-mounting bracket to wall brackets in predrilled holes.

 Heater Mounting Bracket

STEP 12

Install rocks by removing the rock guard (4) screws. Rinse the rocks of residue prior to placing them into the heater. Place small or flat rocks around the outer perimeter of heat chamber, including the ends. Place larger rocks loosely in middle of heater. Fill the heater until flush with the top of the outer shroud. Add 3 to 4 large rocks to top of heater. Reinstall rock guard.

  • Note: There will be extra rocks provided (i.e. do not try to get all the rocks into the heater). The concept of rock placement is to promote good airflow through the heater.
  • Note: Use only the “olivine” sauna rocks provided with the heater. If other rocks are used, the warranty is void.
 Sauna Heater Rock

STEP 13

Install heater to the mounting bracket. Line up (4) holes in heater to mounting bracket and secure (2) screws on front of heater.

 Sauna Heater Mounting Bracket

STEP 14

Install heater guard (2) screws to the walls.

 Sauna Heater Guard

STEP 15

Put the main heater wire through the hole of the wall.The power cord is located on the right side wall panel. Simply plug into appropriate household outlet when ready to use the sauna. Munt the wooden plate over the hole of the wire outlet.

 DIY Sauna Cabin Heater Wire

 

 

 
 
Cookies help us deliver our services. By continuing to browse this website, you agree to our use of cookies. OK